Rosemount 5081 Explosion-proof Transmitter is a single channel loop powered device that can accept input from pH/ORP sensors, conductivity (contacting and toroidal) sensors and amperometric (dissolved oxygen, chlorine, and ozone sensors).
Rosemount™ 5081 Explosion-proof Transmitter
Fieldbus (pH): Four AI blocks assigned to pH, temperature, reference impedance, and glass impedance. Fieldbus (ORP): Three AI blocks assigned to ORP, temperature, and reference impedance.
Fieldbus (pH and ORP): Execution time 75 msec. One PID block; execution time 150 msec. Device type 4085. Device revision 1. Certified to ITK 4.5.
Minimum power supply voltage is 12 Vdc. Maximum power supply voltage is 42.4 Vdc (30 Vdc for intrinsically safe operation). Power supply voltage should cover the voltage drop on the cable plus the external load resistor required for HART communications (250 Ω minimum).
For details, see specifications for the measurement of interest.
Cast aluminum containing less than 6% magnesium, with epoxy polyester coating. NEMA 4X (IP65). Neoprene O-ring cover seals.
10 lb/11 lb (4.5/5.0 kg)
Robust explosion-proof design constructed with heavy duty cast aluminum.
Faster installation using Quick Start programming
Intrinsically safe, non-incendive, and explosion-proof hazardous area location approvals
Visibility of process parameters by utilizing HART or Foundation Fieldbus digital communications
Effortlessly connect with PLCs and DCS’ by choosing the HART or FOUNDATION fieldbus communication options.